HYD Series · Dual-Servo Hybrid CNC Press Brake. A high-rigidity frame lets the dual-servo system perform at its best; hybrid drive is energy-saving and low-friction, stable even in harsh conditions.
The HYD series are down-acting hybrid CNC machines with a fully steel-welded structure offering excellent rigidity and stability. A servo motor is the main control source for the hydraulics, creating an efficient, reliable system. Coupled with a multi-axis backgauge and an automatic deflection-compensation workbench, the HYD series is highly effective for handling small to large, thick plates.
Specs (by tonnage)
Tonnage
Table length
Throat
Ram stroke
Open height
Motor
80 T
2500
400
200
450
5.5×2 kW
110 T
2500–4000
400
200/250
500
5.5×2 kW
130 T
2500–5000
400
200/250
500
7.5×2 kW
170 T
3200–6000
400
200/250
500
7.5×2 / 11×2 kW
200 T
3200–6000
400
200/250
500/550
11×2 kW
250 T
3200–6000
400
250
550
11×2 kW
320 T
3200–6000
400
300
600
11×2 kW
400 T
3200–6000
450
300
600
15×2 kW
*Each tonnage offers multiple lengths (2.5–6 m) and models (e.g. HYD-25050); larger machines available in the HY/HYD range — contact us.
6+1 Axis Rear Backgauge
Reserved guide-rail positions for easy upgrade to 6+1 axis
Z-axis (optional)
Guide rails on both sides for greater precision and impact resistance
R-axis
X-axis (double guide-rail structure for higher accuracy)
4+1 Axis Rear Backgauge
Oil cylinder (extra-long stroke up to 250 mm)
Auxiliary guide block added to make the upper table more stable
Mechanical compensation workbench (accurate angle adjustment)
Tenon-and-mortise type welding (stable & durable)
Hydraulic system (stable pressure)
Independent fuel tank
Servo motor (energy-saving)
Optical scale
Controls
Processing Interface
Manual Interface
CNC System
Midnight LT 15 Standard
Easily switch between Sburk / Tillham operator interface
High-definition 15-inch colour display
Connection of enterprise digital management software
Used for 4–8 axis press brakes
Graphic scanning and 2D / 3D graphic display
CYBELEC (Switzerland)
Model options: CT-8 / CT-12 / CT-15
USB interface for easy transfer of parameters and bending programs
Wirelessly connect, upgrade software and back up data via computer
Selectable axes: Y1, Y2, X, R, A1, A2, V
2D / 3D graphical display, manual simulation of bending procedures
The "EasyBend" page allows quick, intuitive single-pass setup
DELEM (Holland)
Models available: DA53T / DA58T / DA66
10.1–15" LCD TFT true-colour display
"Shortcut" touch navigation
Selectable axes: Y1, Y2, X, R, A1, A2, V
Deflection compensation control
USB external interface
Profile-53TL off-line programming software
— GET STARTED
Ready to begin? Let's connect.
Submit the enquiry form and our engineers respond within 24 hours with the ideal solution for you.
