The MHB Series is a 5-axis, rail-type H/I-beam fiber laser cutting machine, made in-house by a Taiwan brand and built for H/I-beams and structural profiles. One laser process completes cut-off, bevels, bolt holes and marking — smooth kerf, small heat-affected zone and minimal distortion.
Key features
Light-barrier safety system
Supports a wide range of profile sizes
3D bevel cutting
Laser-scatter protection design
Optional dual-station design
Cypcut (Friendess/Bochu) control system
Boci smart cutting head
Tubes-H structural nesting software
Common materials
H / I structural beams
Flat steel plate
Industries
Heavy machinery manufacturing
Shipbuilding
Construction & architecture
Energy & power facilities
Infrastructure
Agricultural machinery
Processing range
Beam section A ≤ 600 mm, C ≤ 1500 mm
Plate length ≤ 13,000 mm (up to 26,000 mm by model)
Plate width ≤ 1,500 mm
Technical Specifications
Laser power
12 / 20 / 30 kW
Max beam loading length
13 / 26 m
Z-axis travel
12,000 mm
Max travel speed
50 m/min
Max cutting width
1.5 m
Max acceleration
0.6 G
Positioning accuracy
±0.1 mm
Repositioning accuracy
±0.05 mm
Power input
380V / 50Hz
Cutting Capacity (thickness, mm)
Laser power
Carbon steel — straight
Stainless — straight
Carbon steel — bevel
Stainless — bevel
12 kW
20
17
14
12
20 kW
28
24
20
17
30 kW
35
30
24
21
Core Advantages
Higher Quality: smooth kerf, small heat-affected zone, minimal distortion — better parts and lower downstream grinding cost.
Smart Compensation: BCW-series contour scanner + beam cutting module scan steel distortion and compensate in real time, ideal for large H/I-beams.
Efficiency Leap: bevel, cutting and marking in one process — overall efficiency up 30–50%.
Can the MHB also cut flat steel plate, not just beams?
Yes. Typical MHB materials include H/I-beam structural steel and flat steel plate, with plate width up to 1,500 mm and length up to 13,000 mm (up to 26,000 mm depending on model).
How accurate and how fast is the MHB?
Positioning accuracy is ±0.1 mm and repeatability ±0.05 mm, with a maximum travel speed of 50 m/min and maximum acceleration of 0.6 G. Power input is 380V / 50Hz.
Which control system, cutting head and safety features does the MHB use?
The MHB uses a Friendess (Bochu) control system, a BOCI smart cutting head and Tubes-H structural nesting software, with a light-curtain safety system and laser-scatter protection; a dual-station layout is optional.
— GET STARTED
Ready to begin? Let's connect.
Submit the enquiry form and our engineers respond within 24 hours with the ideal solution for you.
